User Manual

24
Rates
Set the Rates to calculate the cost per kWh of the
charging session. Rates are set to $ per kWh.
Primary Rate:
Type the primary rate into the text box. Example: 0.12
= 12¢/kWh. This rate will apply at all times unless Rate
2 or Rate 3 are activated.
Rate 2:
1. Enable the Rate 2 button.
2. Set the Start and Stop time for Rate 2. Rate 2 will
apply during these times. For all other times, the
primary rate will apply.
Rate 3:
1. Enable the Rate 3 button.
2. Set the Start and Stop time for Rate 3. Rate 3 will
apply during these times. For other times Rate 2
and the primary rate will apply.
Schedule
Set the charging schedule to charge between certain
times.
Primary Schedule:
1. Enable the Primary schedule button.
2. Set the Start and Stop times.
3. Optional: Enable Energy Limit 1, kWh. The power
output will be limited to this value during the
scheduled times.
4. Optional: Enable Current limit 1, A. The current will
be limited to this value during the scheduled times.
Secondary Schedule:
The secondary can be used alongside the primary
schedule. For example, use the secondary schedule for
weekends or preconditioning the vehicle.
1. Enable the Secondary Schedule button.
2. Set the Start and Stop times.
3. Optional: Enable Energy Limit 1, kWh. The power
will be limited to this value during the scheduled
times.
4. Optional: Enable Current limit 1, A. The current will
be limited to this value during the scheduled times.
If the Primary and Secondary schedules overlap, the
schedule that begins rst will apply until it reaches the
stop time.