User Manual
Table Of Contents
- 1. Introduction and Unpacking
- 2. Installation Planning and Service Wiring
- 3. Maximum Current Output
- 4. Mounting Bracket
- 5. EasyEvPlug Holster and Cable Management System
- 6. Charging Status Indicators and Buzzers
- 7. Grizzl-E Mini Smart Features
- 8. Operation
- 9. General Product Care and Use
- 10. Warranty and Return Policy
21
Adjustments
Current limit, A:
Set the maximum current by using the slider:
Note: Only Maximum Current settings equal to or less than the DIP switch settings will display.
See “3.1 Adjust Maximum Current by DIP Switches” on page 11 to change the maximum
amperage settings.
Stop Charging:
Enable the button to stop the charging session. The charger will display a solid red indicator
light. Disable the button to restart the charging session.
Independent Counters
Two independent counters calculate the kWh
and Cost of the charging:
• Select the Reset button beside Counter A
or Counter B to reset the counter to 0.
• Counter will automatically begin to track
Energy kWh and Cost when the charging
session begins.
• Uses counters to track any period you
wish. For example, one weekly and one
monthly.