User Manual
Table Of Contents
- 1. Introduction and Unpacking
- 2. Installation Planning and Service Wiring
- 3. Maximum Current Output
- 4. Mounting Bracket
- 5. EasyEvPlug Holster and Cable Management System
- 6. Charging Status Indicators and Buzzers
- 7. Grizzl-E Mini Smart Features
- 8. Operation
- 9. General Product Care and Use
- 10. Warranty and Return Policy
19
7. Grizzl-E Mini Smart Features
Grizzl-E Mini has a complete set of Smart Features. Follow the instructions in this section to
access and use Mini Grizzl-E Smart Features:
• Grizzl-E Mini can connect to any device that connects to WI-Fi (Smart Phone, Laptop,
Computer).
• Grizzl-E Mini Smart Features are available through the web browser. There is no iOS or
Android application.
• Grizzl-E Mini only has a local connection, you must be within range of the charger’s
network or home Wi-Fi network to access Smart Features.
7.1 Connect to Local Grizzl-E Mini Network
1. Plug in the Charger.
2. Open the Wi-Fi settings on your smartphone or computer.
3. Select the charger’s Wi-Fi network UC_Mini_Grizzle.
4. Open your web browser.
5. Enter the IP address 192.168.4.1 into the browser search bar.
6. The Grizzl-E Mini Smart Features will load.
For information on how to connect Mini Grizzl-E to your home Wi-Fi, see “Local WiFi
Conguration” on page 26