User Manual
Table Of Contents
- 1. Introduction and Unpacking
- 2. Installation Planning and Service Wiring
- 3. Maximum Current Output
- 4. Mounting Bracket
- 5. EasyEvPlug Holster and Cable Management System
- 6. Charging Status Indicators and Buzzers
- 7. Grizzl-E Mini Smart Features
- 8. Operation
- 9. General Product Care and Use
- 10. Warranty and Return Policy
18
6.4 Error Troubleshooting
In the instance of a permanent fault, or if the charger is not able to auto-recover, follow these
steps:
1. Unplug the charging connector from the vehicle.
2. Count the number of ashes to identify the error type.
3. Follow the directions in
“7.1 Connect to Local Grizzl-E Mini Network” on page 19 to view
the charger’s status. The status will display the error type.
4. Unplug the charging station.
5. Wait 1-2 minutes, then plug the charging station back in.
6. Conrm the Fault light is no longer present.
7. If the Fault light remains, please contact United Chargers. Fill out the
Technical Support
Form. Indicate the number of red ashes and error type.