User Manual
Table Of Contents
- 1. Introduction & Unpacking
- 2. Installation Planning and Service Wiring:
- 3. Adjustable Maximum Current Output
- 4. Installation
- 5. Wiring Connection
- 6. EasyEvPlug Holster and Cable Management System
- 7. Charging Status Indicators and Buzzers
- 8. Operation
- 9. General Product Care and Use Information
- 10. Warranty and Return Policy
24
8. Operation
8.1 Connect and Charge
8.2 Stop Charging
Insert the charging Connector into the EV and ensure the connector is fully seated/locked in
place. Once complete, the charging session will begin.
1. Unplug the charging station by pressing the connector button and removing the Charger
Connector from the EV (once the connector button is depressed, the charging session
terminates immediately).
2. Return the connector to the holster.