User Manual
Table Of Contents
- 1. Introduction & Unpacking
- 2. Installation Planning and Service Wiring:
- 3. Adjustable Maximum Current Output
- 4. Installation
- 5. Wiring Connection
- 6. EasyEvPlug Holster and Cable Management System
- 7. Charging Status Indicators and Buzzers
- 8. Operation
- 9. General Product Care and Use Information
- 10. Warranty and Return Policy
22
7. Charging Status Indicators and Buzzers
LED Indicator Buzzer Description Definition
No buzzer
No buzzer
No buzzer
No buzzer
No buzzer
Buzzer beeps
Not illuminated
Blue Steady
Blue Flashing
Green Flashing
Green Steady
Red Flashing *
Power Off
Ready
Vehicle detected
Charging in progress
Charging complete or no
current consumed by the car
Fault
7.1 Indicator Lights
Grizzl-E uses the following indicator lights for the charger status:
LED Indicator # of Flashes Error Description
Red Flashing 1 Lost ground - AC Line1
Red Flashing 2 GFCI High Leakage
Red Flashing 3 Relay is stuck
Red Flashing 4 GFCI Low Leakage
Red Flashing 5 High temperature of the module
Red Flashing 6 High temperature of the relay-
Red Flashing 7 Pilot state is Status E
Red Flashing 8 Pilot state is Status F
Red Flashing 9 Diode error
Red Flashing 10 Over Current
Red Flashing 12 Application Error
7.2 LED Fault Indicator
The number of red flashes indicates the type of fault: