Operation Manual

1
1．Toggle switch
a Turn off
b Low
c High
Toggle switch
a Turn off
b Low
c High
Turn off, Low and High.
2
Infrared wall transmit-
Slide , then you can adjust the distance of the Space
ting signal head
Isolator.
3
Near-infrared transmit
-
The near-infrared transmitting signal makes the Cleaner
ting head
run outside the Space Isolator scope of 50-100cm without
any impact to it.
4
The Power LED will flicker once every 8s until the low
Power LED
battery after you slide to Low,
High, and
Slide to the position, then the power is off.
Slide to Low and turn on the power, you can select
the distance within 3m as required by infrared wall.
Slide to High and turn on the power, you can select
the distance within 6m as required by infrared wall.
Overall Display Function Instructions
No. Name Function Information
You can switch the function by sliding repeatedly:
the Cleaner works normally.