Operation Manual

1
2．
3．
Power LED
4．
Charging indicator
5．
Signal transmitter
6．
Charging positive electrode
Charging negative electrode
Charging power DC socket
1
The Power LED will light when the Docking Station is
Power LED
connected with the power, or turn off if not connected.
2
The indicator will flicker while the recharger is connected
Charging indicator
with the cleaner.
3
Transmitting signal is the only way to lead the cleaner to
Signal transmitter
return the Docking Station for charging, so the signal
transmitter position should be clean for long without any
obstacle on it.
4-5
Recharging positive
The electrode and that of the Cleaner are connected to
& negative electrode
charge under contact mode, so the position should be
clean without any obstacle on it while using, or there will be
impact to the charging.
6
Charging power DC
The power DC socket, called recharger for short, used to
socket
connect output terminal DC24V of the adaptor, is the
charging transit station between the Cleaner and adaptor,
so the recharger should be placed against the wall firmly
and the adaptor cable should be away from the recharger,
or the Robot may have been impacted and winded.
Using Method & Functional Status of the Docking station :
Overall Display Function Instructions
No. Function Guide Function Information
3
6
5
4
2
1