Cleaner Side brush(two) mop pad (two) Remote control AC/DC Adaptor Manual Auto charging docking station Filter(two) Dust Brush Space Isolator Trailing Bar
Control Panel of Main Body: LCD directive sign Display Interface Menu Display: 1. Date/week set display 2. Wheel rotation/speed display 3. “UV” lamp display 4. Auto “Auto” cleaning display 5. Spot “Spot” cleaning display 6. 7. 8. Current week display malfunction display Charging/power display 9. Time/error code display Touch key: Spot UV Auto 1. UV UV lamp key 2. Auto Auto cleaning key 3. Spot Spot cleaning key opening Auto Spot 05 7.
Parts: Top of main body Front bumper Infrared signal receiver Touch button Display screen Dustbin key Bottom of main body Side cleaning brush Right wheel Front wheel Floor brush Main brush Mop pad Ground detection sensor UV sterilizing lamp Battery cover Left wheel
Installation of Docking Station and Charging for the cleaner: Figure 1 High Voltage! Electrical hazard! Please dry your Please place the power cord of the adaptor along the wall, or it may interfere with the brush or wheels.
Figure 4 Figure 5 Figure 6 Automatic charging: The Cleaner will search the Docking Station for charging automatically in case of low battery during cleaning.
Assembly & Disassembly and Cleaning of Dustbin: Assembly & Disassembly of Dustbin: Figure 1 Figure 2 Figure 3 Figure 4 Figure 5 Figure 6 Figure 7
3 4 5
Assembly & Disassembly and Cleaning of Left/Right Wheel and Front Wheel: Figure 1 Figure 2
6.
Auto Spot Clock WED Schedule YUE F Speed SUN
Charge CHARGE
Overall Display Function Instructions 1 2 6 5 4 3 1 Power LED 2.Charging indicator 3.Signal transmitter 4.Charging positive electrode 5.Charging negative electrode 6.Charging power DC socket Using Method & Functional Status of the Docking station : No. Function Guide Function Information 1 Power LED The Power LED will light when the Docking Station is connected with the power, or turn off if not connected.
Overall Display Function Instructions 1.Toggle switch No. Name Toggle switch 1 2 3 4 a Turn off b Low c High Infrared wall transmitting signal head Near-infrared transmitting head Power LED a b c Turn off Low High Function Information You can switch the function by sliding repeatedly: Turn off, Low and High. Slide to the position, then the power is off. Slide to Low and turn on the power, you can select the distance within 3m as required by infrared wall.
Failure Code Failure Cause E001 Ground detection sensors Clean the sensors at the front bottom of the cleaner E002 Middle brush Clean the rubbish such as hair, thread wrapped on the brush E003 Power off Use the adaptor to charge , after full charged , then use again E004 Left &right wheel Check the left and right wheels , clean the rubbish on it E005 Dustin poor contact Check the dustbin and re-fix the dustbin after cleaning