Operation Manual

1. Inserting Micro SD Card
Note: Please choose branded Micro SD card and format it on computer before use. Neutral cards
are not guaranteed to work normally.
2. Installing and removing batteries
A Press on battery cap to open it.
B Correctly install battery into camera as indicated by +/- symbols and direction of arrows
marked on battery until it’s in place.
C Battery Indicator: Please refer to image.
D Remove Battery: Open cap to take battery out.
3. Charging
A Charging can be done by either connecting unit to computer or power adaptor.
B Charge camera on vehicle by connecting it to car charger.
4. Switching camera on and off
A Press and hold power switch for 3 to 5 seconds to turn it on / off.
B Switch it on and off by turning display screen on and off.