SDS

Revision Date: 12/10/2015
Page of
1 5
Safety Data Sheet
HANDLING AND STORAGE7
When applicable, inhalation of dust should be avoided. Exercise care when dumping bags,
sweeping, mixing or performing other tasks that might create dust.
Handling Precautions:
EXPOSURE CONTROLS/PERSONAL PROTECTION8
Use mechanical (general) ventilation to contain volatiles during processing or dusting when
handling/conveying
HMIS PP, E | Safety Glasses, Gloves, Dust Respirator
HMIS PP, T | Dust Respirator
HMIS PP, A | Safety Glasses
Where large amounts of dust may occur, wear NIOSH / MSHA approved dust/mist respirator
Wear thermal protective gloves if handling hot material
Safety glasses are recommended when handling this product
Exposure Limits: This compound may contain the following hazardous substances. Their respective exposure limits are
listed. Engineering controls and personal protective equipment (PPE) used during handling and processing of this product are
expected to keep exposures of said substances below their respective exposure limits.
Vinyl Chloride Monomer CAS# 75-01-4 Acrylic Copolymer (proprietary)
OSHA (TWA5)/PEL): 1 ppm/ 8hr TWA
OSHA (TWA5)/PEL): 100 ppm
ACGIH (TWA/TLV): 5 ppm
ACGIH (TWA/TLV): 50 ppm
Titanium Dioxide CAS#13463-67-7 Organotin Compounds (proprietary)
OSHA (TWA5)/PEL): 15 mg/m3
OSHA (TWA5)/PEL): 0.1 mg/m3
ACGIH (TWA/TLV): 10 mg/m3
ACGIH (TWA/TLV): 0.1mg/m3
Calcium Stearate CAS# 1592-23-0
Manganese CAS 7439-9605
OSHA (TWA5)/PEL): not established OSHA PEL: 0.5 mg/m3
ACGIH (TWA/TLV): 10 mg/m3 ACGIH-TLV: 0.5 mg/m3
Chromium CAS 7440-47-3
Antimony CAS 7440-36-0
OSHA PEL: 0.5 mg/m3
OSHA PEL: 0.5 mg/m3
ACGIH-TLV: 0.5 mg/m3
ACGIH-TLV: 0.5 mg/m3
Carbon Black CAS 1333-86-4
OSHA PEL: 3.5 mg/m3
ACGIHTLV: 3.0 mg/m3
Engineering Controls:
Personal Protective
Equipment:
PHYSICAL AND CHEMICAL PROPERTIES9
Solid
>1.2
Physical State:
Spec Grav./Density:
Odor:
Slight odor
Appearance:
Solid Pellet