Installation Guide

ManualsBrandsGrip-Rite ManualsRoofing UnderlaymentSLG4250GRE

ShingleLayment

Lightweight Synthetic Underlayments

ShingleLayment

Lightweight synthetic underlayments

GRSLLBRO

03/2014

Introducing two new

lightweight synthetic roong

underlayments, designed

to replace #15 saturated

asphalt felt.

Product Name:

Grip-Rite ShingleLayment-E

Grip-Rite ShingleLayment-15

Manufacturer:

PrimeSource Building Products, Inc.

1321 Greenway Drive, Irving, TX 75038

800-676-7777

www.primesourcebp.com

www.grip-rite.com

Product Description:

ShingleLayment-E is a lightweight version of our

proven Grip-Rite ShingleLayment. Woven 8 x 7 scrim

Polypropylene substrate coated on the walking surface

with a non-skid TPO. ShingleLayment-E has high tensile

strength to resist blow off from high wind exposure.

ShingleLayment-E can be used under any mechanically

attached asphalt shingle application.

ShingleLayment-15 is a woven 10 x 10 scrim

polypropylene substrate coated on the walking surface

with a spun bonded non-woven that provides non-skid

traction. ShingleLayment-15 has high tensile

strength to resist blow-off from high wind exposure.

ShingleLayment-15 can be used under any mechanically

attached asphalt shingle application.

Application:

Both products are designed for use on steep slope

roofs beneath asphalt shingles as an alternate to

ASTM D226, Type I or II or ASTM D4869 asphalt felts.

Both are a water shedding device designed to reduce

the occurrence of leaks caused by wind-driven rain

penetrating the primary roof system coverings

as well as a temporary cover on exposed roof decks.

 These new synthetics outperform felt in every way – they roll out at, hold a chalk line, have a non-skid surface,

are mold resistant, and resist tear and cracking.

 ShingleLayment Lightweights™ are backed by a limited warranty – felt paper doesn’t come close.

 Finish the job right with Grip-Rite Eave & Valley Protector

™

and Grip-Rite Fasteners

Grip-Rite ShingleLayment

is distributed by PrimeSource Building Products, Inc.

800-676-7777

www.grip-rite.com

www.primesourcebp.com

SKU Description

Size

Color

Weight/

Roll

Rolls/

Pallet

Pallets/

Truckload

Rolls/

TruckloadArea Dimensions

SLG4250GRE ShingleLayment-E 10 SQ 4 ft. x 250 ft. Gray 19.5 lb. 64 30 1,920

SL154250GR ShingleLayment-15 10 SQ 4 ft. x 250 ft. Gray 22.5 lb. 49 35 1,715

ShingleLayment-E

- Gray

ShingleLayment-15

- Gray

The time to convert from asphalt felt is NOW, with the new Grip-Rite

ShingleLayment Lightweight series of synthetic underlayments.

Features & Approvals:

Both Products

 10 SQ coverage

 Superior tear resistance

 UV treated for 180 day exposure

 5 times lighter than #15 felt

 Contains no asphalt

 Mold & crack resistant

 Printed nail and overlap pattern

 AC 188

 ASTM D226 (non-asphalt properties)

 ASTM D4869 (non-asphalt properties)

 ASTM E96 (non-asphalt properties)

 CAN CSA 123.3-05 (non-asphalt properties)

ShingleLayment-E

 Non skid TPO walking surface

 10 year warranty

 Exclusive shingle print pattern

ShingleLayment-15

 Non-skid SBPP surface

 10 year limited warranty

 Installer print pattern

Summary of content (4 pages)

PAGE 1
ShingleLayment ShingleLayment ® Lightweight Synthetic Underlayments ® Lightweight synthetic underlayments The time to convert from asphalt felt is NOW, with the new Grip-Rite ShingleLayment Lightweight series of synthetic underlayments.  These new synthetics outperform felt in every way – they roll out flat, hold a chalk line, have a non-skid surface, are mold resistant, and resist tear and cracking.  ShingleLayment Lightweights™ are backed by a limited warranty – felt paper doesn’t come close.
PAGE 2
ShingleLayment ShingleLayment ® Lightweight Synthetic Underlayments Installation: Both Grip-Rite ShingleLayment Lightweights™ shall be installed in compliance with the codified requirements for ASTM D226, D4869 or underlayment for the type of prepared roof covering to be installed. ® Instructions: Re-fasten any loose decking panels and check for protruding nail heads. Sweep the substrate thoroughly to remove any dust and debris prior to application.
PAGE 3
ShingleLayment ShingleLayment ® Lightweight Synthetic Underlayments Installation: Both Grip-Rite ShingleLayment Lightweights™ shall be installed in compliance with the codified requirements for ASTM D226, D4869 or underlayment for the type of prepared roof covering to be installed. ® Instructions: Re-fasten any loose decking panels and check for protruding nail heads. Sweep the substrate thoroughly to remove any dust and debris prior to application.
PAGE 4
ShingleLayment ShingleLayment ® Lightweight Synthetic Underlayments ® Lightweight synthetic underlayments The time to convert from asphalt felt is NOW, with the new Grip-Rite ShingleLayment Lightweight series of synthetic underlayments.  These new synthetics outperform felt in every way – they roll out flat, hold a chalk line, have a non-skid surface, are mold resistant, and resist tear and cracking.  ShingleLayment Lightweights™ are backed by a limited warranty – felt paper doesn’t come close.