Technical Specifications

DESCRIPTION

PART DESCRIPTIONS

1. 360° Adjustable Air Deflector - Tool-free adjustment blows exhaust

air away from operator. 12 locking positions for secure settings.

2. Cushioned Grip - Cushioned handgrip reduces fatigue and provides

comfortable operation.

3. Dual Action Trigger (Standard) - Actuates tool when workpiece

contact is depressed against work surface. Permits contact-trip

(bump fire) or trigger-fire operation.

Sequential Trigger (Accessory) - Actuates tool only when correct

trigger operating sequence is followed. Does not allow bump firing.

4. Air Coupling - Quick-disconnect male coupling allows quick

connection to air hose. Dust cap keeps dirt out when tool is not in

use.

5. Safety Warning Label - Provides important safety reminders that

must be followed whenever handling, operating, or servicing the tool.

6. Top Load Staple Magazine - Hold fasteners securely, and allows

quick check of staple size and quantity.

7. Spring-loaded Pusher - Provides positive fastener feeding in all

tool positions. Latches in loading position for rapid, one-handed

loading. Triangle indicators show when it’s time to reload.

8. Adjustable Depth of Drive - Easy, one-tool depth of drive adjust-

ment allows adjustments to be made at tool nose for consistent

depth control.

9. Workpiece Contact - Spring-loaded contact mechanism prevents

tool from driving a fastener unless tool is pressed down and held

against a work surface.

10. E-Z Clear Latch - Clear jammed fasteners from nose without tools.

11. Tool Housing - Magnesium tool housing reduces tool weight.

12. Cap - Seals tool housing.

Metric Hex Wrenches - Included with tool to allow tightening of

metric screws and depth of drive adjustments. Keep tools in tool

case for periodic tightening of screws.

Air Tool Oil - Lightweight oil formulated for use in air tools provides

proper lubrication to o-rings and internal parts.

Safety Goggles - Provide required eye protection

DESCRIPTION

TOOL PARTS