OPERATOR’S MANUAL AND PARTS LIST MODEL GRTMP16 MINI AIR NAILER Distributed By www.grip-rite.
TABLE OF CONTENTS SPECIFICATIONS SPECIFICATIONS TABLE OF CONTENTS -------------------------------- 2 SPECIFICATIONS --------------------------------------- 3 MODEL GRTMP16 FASTENER LENGTH FASTENER HEAD DIA. NAIL TYPE MAX AIR PRESSURE MIN AIR PRESSURE TOOL WEIGHT TOOL LENGTH TOOL HEIGHT TOOL WIDTH TRIGGER TYPE Nails up to 16d 5/16” (8 mm) Hand Driven 110 psi (7.6 bars) 60 psi (4 bars) 1 lbs. (.45 kg) 4” (101.6 mm) 2.75” (69.9 mm) 2.19” (55.
SAFETY SAFETY SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS WEAR SAFETY GLASSES Always wear safety glasses with side shields that meet ANSI Z87.1 requirements when operating the tool. Make sure all others in work area wear safety glasses. WEAR HEARING PROTECTION Wear hearing protection to protect your hearing from noise. Prolonged exposure to loud noise can result in hearing loss.
DESCRIPTION DESCRIPTION PART DESCRIPTIONS TOOL PARTS 3 2 4 1 1. Nail Guide - Narrow profile design permits accurate nail placement. 2. Tool Body - Contains nail driver parts and acts as a handgrip. 3. Tool Cap - Covers nail driver assembly. 4. Cap Screw - Secures cap to tool body 5. Air Coupling - Quick-disconnect male coupling allows quick connection to air hose. 6. Guide Box - Secures Nail Guide. 7. Magnetic Nail Holder - Helps keep nail in place while positioning nailer for driving.
OPERATION OPERATION LOADING FASTENERS OPERATION LOADING INSTRUCTIONS WARNING The model GRTMP16 Air Nailer is automatically actuated when the nail in the nose is pressed against the work surface. The nailer continues to deliver multiple hammer blows until the nail is fully driven, or tool is lifted off work surface. Never press tool nose down unless it has been properly positioned to drive a nail into a safe work surface. 1. Hold the tool securely using the housing as a handgrip.
PARTS SCHEMATIC PARTS LIST ITEM# PART # DESCRIPTION Q’TY 1 GRBN367 Bolt Assy 4 2 GRBN368 Cap 1 3 GRBN369 O - Ring 2 4 GRBN370 Collar 1 5 GRBN371 Cylinder Cap Seal 1 6 GRBN372 Cylinder Spacer 1 7 GRBN373 O - Ring 2 8 GRBN374 Seal 1 9 GRBN375 Cylinder 1 10 GRBN376 O - Ring 1 11 GRBN377 O - Ring 1 12 GRBN378 Driver Unit 1 13 GRBN379 Bumper 1 14 GRBN380 Gun Body 1 15 GRBN381 Air Plug 1 16 GRBN382 Wave Washer 1 17 GRBN383 Spring 1 18 GRBN3
MAINTENANCE TROUBLESHOOTING TOOL TROUBLESHOOTING MAINTENANCE DANGER DANGER Always disconnect tool from air supply before performing any service on tool. Correcting a problem while the tool is pressurized may result in injury from nail drive or tool operation. Always disconnect tool from air supply before performing any service on tool. Correcting a problem while the tool is pressurized may result in injury from nail drive or tool operation.
WARRANTY WARRANTY PNEUMATIC TOOL/COMPRESSOR WARRANTY Pneumatic nailers, staplers & compressors marketed under the GRIP RITETM brand are warranted to be free from defects in workmanship & materials (except rubber o-rings, bumpers, seals, driver blades, dipsticks, & air filters) for a period of one year from the date of original purchase.
USE GENUINE GRIP-RITE® FASTENERS FOR BEST PERFORMANCE www.grip-rite.
