SDS

ManualsBrandsGrip Fast ManualsFasteners & Connectors3-1/2" 16D Vinyl-Coated Smooth Shank Sinker Nail - 5 lb. Box

SECTION 1 — CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

Product Identifier: Carbon Steel Bright Nails with Anti-Withdrawal Coating

Product use: Used for Driving in Wooden & Correlated products

Manufacturer’s Name :

Astrotech steels Pvt Limited,

1335 Cannon Road, Sector 36,

Sricity SEZ, Satyavedu Mandal,

Chittoor District, Andhra Pradesh

India-517588.

SECTION 2 — HAZARDS IDENTIFICATION

Routine of

Entry

Skin Contact :

Minor

Skin absorption:

Minor

Eye contact:

Minor

Inhalation : Major

only when heated

Ingestion: Minor

Emergency Overview: N/A

WHMIS Symbol : N/A

ACUTE HEALTH EFFECTS :

SWALLOWED:

 Not normally a hazard due to physical form of product.

 Considered an unlikely route of entry in commercial/industrial environments.

EYE:

 Dust may irritate eyes and the respiratory system. Iron particles in the eye may leave a "rust ring" or

brownish stain on the cornea

Astrotech Steels Private Limited

Safety Data Sheet for Bright Nail

Document # : SDS 01

Issue Date : 13/05/2016

Rev # : 02

Summary of content (6 pages)

PAGE 1
Astrotech Steels Private Limited Safety Data Sheet for Bright Nail Document # : SDS 01 Issue Date : 13/05/2016 Rev # : 02 SECTION 1 — CHEMICAL PRODUCT AND COMPANY IDENTIFICATION Product Identifier: Carbon Steel Bright Nails with Anti-Withdrawal Coating Product use: Used for Driving in Wooden & Correlated products Manufacturer’s Name : Astrotech steels Pvt Limited, 1335 Cannon Road, Sector 36, Sricity SEZ, Satyavedu Mandal, Chittoor District, Andhra Pradesh India-517588.
PAGE 2
SKIN:  Skin contact does not normally present a hazard, though it is always possible that occasionally individuals may be found who react to substances usually regarded as inert.  Chrome fume, as the chrome VI oxide, is corrosive to the skin and may aggravate pre-existing skin conditions such as dermatitis and eczema. As a potential skin sensitizer, the fume may cause dermatomes to appear suddenly and without warning.
PAGE 3
SECTION 3 — COMPOSITION/INFORMATION ON INGREDIENTS BASE METAL, ALLOYING ELEMENTS & ANTI-WITHDRAWAL COATING PERMISSIBLE EXPOSURE LIMITS (OSHA PEL) % BASE METAL IRON (Fe) 98.0 % MAX 10 mg/M as Iron Oxide Fume CARBON (C) 0.20 % MAX None listed MANGANESE (Mn) 0.90 % MAX 5mg/M³ PHOSPHOROUS (P) 0.04 % MAX 0.1mg/M³ SULFUR (S) 0.05 % MAX 13mg/M³ as sulfur Dioxide SILICON (Si) 0.30 % MAX None listed CHROMIUM (Cr) 0.01 % MAX 1mg/M³ MOLYBDENUM (Mo) 0.
PAGE 4
SECTION 5 — FIRE FIGHTING MEASURES Flammable: ( Yes / No ) : No If yes, under which conditions? Not Applicable Means of Extinction : No fire or explosion hazard – not combustible Flashpoint (°C) and Method: Not applicable Upper Flammable Limit (% by volume) : Not applicable Auto ignition Temperature (°C): Not applicable Explosion Data — Sensitivity to Impact : Not sensitive, Stable material Lower Flammable Limit (% by volume) : Not applicable Explosion Data — Sensitivity to Static Discharge: Massive m
PAGE 5
SECTION 9 — PHYSICAL AND CHEMICAL PROPERTIES Appearance (physical state, color etc.): Solid , Massive grey metal Odor: Odorless Odor threshold: N/A pH: Not applicable Melting point/freezing point: Specific Gravity : 7.
PAGE 6
SECTION 12 — ECOLOGICAL INFORMATION N/A SECTION 13 — DISPOSAL CONSIDERATIONS Follow the national, provincial and local regulations Waste Disposal Methods: Prevent waste from contaminating surrounding environment, scrap steel should be recycled. Discard any product, residue, disposable container, or liner in an environmentally acceptable manor, in full compliance with federal state and local regulations. Lead is a listed hazardous waste.