LS1be Studio Monitors Manual

page 28
page 29
LS1r Controller
LS1r - Controller
LS1r - Controller
Let's have a closer look at the functions of the LS1r Controller.
The display on the front panel shows either the volume level, an activated MUTE (or DIM) mode
or the respective input source while switching sources.
On top of the box you nd a big dial that controls three functions:
1. Volume Control
If you turn the dial clockwise the volume is raised, if you turn it counterclockwise the volume is
attenuated.
2. MUTE or DIM function
By shortly pressing the dial you can activate the mute or dim function (chosen in the software
settings), by pressing it again the mode is deactivated. The preferences of the remote software
allow the choice for either a complete mute of the signal, a dim (attenuation) of the signal by
10dB or a dim of the signal by 20dB. The dim function can be handy if you want to talk or answer
the phone for example, while playback of the music continuous in the background.
3. Switching between input sources
If you press and hold the dial and then turn it clockwise or counterclockwise, you can change the
source. The display indicates which of the input sources is selected. When the source you want to
listen to shows up in the display, simply release the knob and the input source is now selected.
-> The Grimm Audio LS1r Controller has an infrared sensor. So any universal IR-remote can be used to
remotely control these three functions! Please learn how to program your remote on the next page.