Operation Manual

0.4 - GUARDS

The MINIGRIMAC component parts are housed inside a series of covers

or guards that isolate them from any contact with the outside and the

person using the machine.

A - Removable top guard: protects the tank containing the water supply

(MINIGRIMAC - Tank). It is not fixed by screws and is removed in

order to supply the machine with water.

In the MINIGRIMAC - Mains Supply model there is no tank under the

guard but a pressure adjuster that has been calibrated by GRIMAC

s.r.l. during testing.

B - Fixed top guard: must be removed ONLY by competent and

authorised service staff. It contains the machine’s vital working parts.

This guard can be used as a flat service on which to place cups and

saucers.

C - Bottom guard: must never be removed (ONLY by competent and

authorised service staff).

SECTION 0 - INTRODUCTION