Instructions / Assembly

UNPACKING

* NOTE: Before unpacking the Grill Dome, it is best to place the cooker as close to its resting space as

possible.

1. Cut the strapping with a scissor or knife and remove the outer packing of the Grill Dome.

This includes the -

 Top cardboard packing

 Middle card board strip

 Clear plastic cover

2. Cut the twine or tie on each side of the cooker that ties the big bolts.

3. Do not remove the white or grey cloth gaskets on the mating surfaces of the base and the lid.

4. Open and lock the lid to remove packing inside the grill.

 If you have a scissor hinge model, remove the cloth which is wrapped around the side hinges.

Open the lid by lifting from the handle. Lock the lid in to position by pulling the extended thumb

arms of the side hinges towards you one at a time.

 If you have the Auto Hinge Model simply open the lid gently to the final position.