Data Sheet

Silicone Spray nl/Fr
Our advice is based on extensive research and practical experience. However, in view of the large variety of materials and the conditions under which our products are applied, we assume no responsibility for the results
obtained and/or any damage caused by the use of the product. Nevertheless, our Service Department is always at your disposal for any advice needed.
www.grion.eu
1Bison International B.V. - P.O. Box 160 - NL 4460 AD Goes
1233406  GRIFFON SILICONE SPRAY AEROSOL 300 ML NL / FR / DE
UniverSal tranSparent Slipping, lUbricating and anti-
adheSion agent
PRODUCT DESCRIPTION
Universal transparent slipping, lubricating and anti-adhesion agent based on
pure silicone oil.
FIELD OF APPLICATION
For clean and light lubrication of sliding doors, sliding windows, drawers and
bay windows, locks, wiring, cables, hinges, latches, zips, (curtain) rails, roller
bearings, wheels and levelling feet, among others. Also for maintenance of
(motor) bikes, scooters, machinery, (garden) tools and sports equipment.
Prevents dirt and grease deposits on biological waste bins, exhaust hoods, fans,
ovens, microwaves, bumpers and grills. Makes cleaned textiles and leather
water repellent, prevents freezing of (door) rubbers and keeps chains and gears
clean.
PROPERTIES
· Rust and corrosion resistant
· Water displacing
· Water repellant
· Electrically insulative
· Chemical resistant
· Low surface tension
· With extra precision spray hose
· Can be used in all positions
PREPARATION
Preliminary surface treatment: Make sure that the surface is clean, dry, and
free of grease.
APPLICATION
Directions for use:
Shake well before use. Spray surface(s) evenly from a distance of approx. 10-20
cm.
Points of attention: Use the additional spray hose integrated in the cap for
optimum dosage. Do not use on silicon compounds such as glass and stone.
Treated surfaces are not paintable.
TECHNICAL PROPERTIES
Water resistance: Very good
Temperature resistance: -50°C to +200°C
TECHNICAL SPECIFICATIONS
Chemical base: Pure silicone oil in solvent
Colour: Transparent
Viscosity: Runny
STORAGE CONDITIONS
A minimum of 36 months. Close the container properly and store in a dry, cool
and frost-free location.
1233406 20161226

Summary of content (1 pages)