Safety data sheet

Page 5/9
Safety data sheet
according to 1907/2006/EC, Article 31
Printing date 13.08.2016 Revision: 13.08.2016Version number 85
Trade name: Griffon Verimor
(Contd. of page 4)
43.0
.
Penetration time of glove material
The exact break trough time has to be found out by the manufacturer of the
protective gloves and has to be observed.
.
For the permanent contact of a maximum of 15 minutes gloves made of the following
materials are suitable:
PVC or PE gloves
.
Eye protection:
Tightly sealed goggles
9 Physical and chemical properties
.
9.1 Information on basic physical and chemical properties
.
General Information
.
Appearance:
Form:
Aerosol
Colour:
According to product specification
.
Odour:
Characteristic
.
Odour threshold:
Not determined.
.
pH-value:
Not determined.
.
Change in condition
Melting point/Melting range:
Undetermined.
Boiling point/Boiling range:
-0 °C
.
Flash point:
<-21 °C
.
Flammability (solid, gaseous):
Not applicable.
.
Ignition temperature:
225 °C
.
Decomposition temperature:
Not determined.
.
Self-igniting:
Product is not selfigniting.
.
Danger of explosion:
Not determined.
.
Explosion limits:
Lower:
0.9 Vol %
Upper:
8.5 Vol %
.
Vapour pressure at 20 °C:
2100 hPa
.
Density at 20 °C:
0.621 g/cm³
.
Relative density
Not determined.
.
Vapour density
Not determined.
.
Evaporation rate
Not applicable.
.
Solubility in / Miscibility with
water:
Not miscible or difficult to mix.
.
Partition coefficient (n-octanol/
water):
Not determined.
.
Viscosity:
Dynamic at 20 °C:
25 mPas
Kinematic:
Not determined.
Organis solvents:
61.5 %
(Contd. on page 6)
GB-EN
GRIFFON VERIMOR AER 300ML*12 L1
1235602 - GRIFFON VERIMOR AER 300ML*12 L1
www.griffon.eu 5/9