Data Sheet

PTFE SPray
Our advice is based on extensive research and practical experience. However, in view of the large variety of materials and the conditions under which our products are applied, we assume no responsibility for the results
obtained and/or any damage caused by the use of the product. Nevertheless, our Service Department is always at your disposal for any advice needed.
www.grion.eu
1Bison International B.V. - P.O. Box 160 - NL 4460 AD Goes
1233426  GRIFFON PTFE SPRAY AEROSOL 300 ML NL / FR / DE
HigH-qualiTy mulTi-FuncTional lubricanT baSEd on P.T.F.E.
PRODUCT DESCRIPTION
High-quality multi-functional lubricant based on P.T.F.E.
FIELD OF APPLICATION
For the lubrication of metals and synthetics that are submitted to heavy and
prolonged loads, such as machines, hinges, tools, chains, derailleur gears, roller
bearings and pulleys. For use in workshop, house, garage, caravan, car and boat,
among others.
PROPERTIES
· Silicone-free
· Moisture resistant
· Does not aect synthetics and rubbers
· With extra precision spray hose
· Can be used in all positions
PREPARATION
Preliminary surface treatment: Make sure that the surface is clean, dry, and
free of grease.
APPLICATION
Directions for use:
Shake well before use. Spray surface(s) evenly from a distance of approx. 10-20
cm.
Stains/residue: Remove stains with Grion Primor or degreaser.
Points of attention: Use the additional spray hose integrated in the cap for
optimum dosage.
TECHNICAL PROPERTIES
Moisture resistance: Very good
Temperature resistance: -50°C to +200°C
TECHNICAL SPECIFICATIONS
Chemical base: Mineral oil with P.T.F.E
Colour: Transparent
Viscosity: Runny
STORAGE CONDITIONS
A minimum of 36 months. Close the container properly and store in a dry, cool
and frost-free location.
1233426 20161226