Data Sheet
Lubrit-ALL®
Our advice is based on extensive research and practical experience. However, in view of the large variety of materials and the conditions under which our products are applied, we assume no responsibility for the results
obtained and/or any damage caused by the use of the product. Nevertheless, our Service Department is always at your disposal for any advice needed.
www.grion.eu
1Bison International B.V. - P.O. Box 160 - NL 4460 AD Goes
1233451 GRIFFON LUBRITALL® AEROSOL 300 ML NL / FR / DE
MuLtifunctionAL MAintenAnce Agent
PRODUCT DESCRIPTION
Multifunctional maintenance agent for lubricating, protecting, cleaning and
loosening in 1001 applications.
FIELD OF APPLICATION
For lubricating, protecting, cleaning and loosening in 1001 applications, such as
in the home, workshop, garage, garden, caravan, car and boat. Suitable for, e.g.,
lubricating sliding doors, windows, hinges, latches, locks and roller bearings.
Also for maintenance of (motor) bikes, scooters, machinery, (garden) tools and
sports equipment. Also for removing dirt and grease from wheel rims, (bicycle)
chains, gears, bearings and loosening rusted and oxidised (xation) materials
such as bolts and nuts.
PROPERTIES
· Lubricates
· Protects
· Removes dirt and grease
· Unlatches
· Corrosion retardant
· Dissolves dirt and oxides
· Moisture repellent
· Silicone-free
· With extra precision spray hose
· Can be used in all positions
PREPARATION
Preliminary surface treatment: Make sure that the surface is clean, dry, and
free of grease.
APPLICATION
Directions for use:
Shake well before use. Spray surface(s) evenly from a distance of approx. 10-20
cm. For use as penetrating oil, spray surface(s) generously. After about 5 -10
minutes, the parts can be disassembled. For preventive use parts must be
treated rst, then assembled.
Stains/residue: Remove stains with Grion Primor or degreaser.
Points of attention: Use the additional spray hose integrated in the cap for
optimum dosage.
TECHNICAL PROPERTIES
Moisture resistance: Very good
Temperature resistance: From -50°C to +125°C
TECHNICAL SPECIFICATIONS
Chemical base: Solvents and mineral oil
Colour: Transparent
Viscosity: Runny
STORAGE CONDITIONS
A minimum of 36 months. Close the container properly and store in a dry, cool
and frost-free location.
1233451 20161226