Product Manual

ALA Industries, LTD 3410 Delta Dr. Portage, IN 46368
Phone: 219-762-2059 Web: grh-usa.com
Technical Speci cations
Flow Rate (gpm) = Displacement (in
3
/rev) X Speed (rpm) / 231
Volumetric ef ciency % 93
Model CB-PTO is a Power Take Off gear pump constructed with cast iron end plates and an
aluminum center section. It offers 4 displacement sizes from 3.41 to 9.76 in
3
/rev (56-160 cm
3
/rev).
Standard drive is 1
3
/8” diameter 6-tooth female spline.
Model
Displacement
(in
3
(cm
3
) / rev)
Pressure
(psi)
Speed
Weight
(lbs)
Rated Max
5.50 (90) 2500 540 595 36
9.76 (160) 2500 540 595 40
Side Port PTO Gear Pump
Model CB-PTO
Installation Data
Recommended working conditions:
FILTRATION: 25 micron or better
OIL VISCOSITY: 7 - 700 cSt
INLET PRESSURE: 12 - 32 psi abs.
OIL TEMP: -25° - 80° C (-12° - 175° F)
AMBIENT: -22° - 55° C (-8° - 130° F)
Model A BCD E
1.62” 1.72” 1.81” 2.97” 5.60”
2.37” 2.09” 2.19” 3.35” 6.35”
*21-tooth Spline option only available on size 3 & 5 pumps by special order - minimum quantities may be required.
Category
Gear Pump
Series
PTO = Power Take
Off Gear Pump
Center Section
A = Aluminum
Drive
6 = 6-tooth Spline
21* = 21-tooth Spline
Ports
S = Side Ports
Ordering Example:
GB PTO A 5
-
Category Series Center Displacement
- -
6
-
Drive
S
-
Ports
Displacement
3/5/7/9
Seal kits for PTO pumps are available.
CB-P90LJ42H2155
CB-P160LJ42H2155
CB-P90LJ42H2155
CB-P160LJ42H2155
Ordering Example:
Category + Series Displacement Ports Drive Shaft Ports Options
CB P160 LJ53 S33 SS
CB-P160LJ53S33SS Category + Series Displacement Port Combo Drive Sha Ports Opons
CB P160=160CC SS=Side Ports
PTO Power take o series P90=90CC LJ42= -16 -12 SAE ORB H21=6 TOOTH SPLINE
Cast Iron end plates and
Alum Center
2500 psi
Standard drive is 1 3/8”
diameter