Operator's Manual

ETD-100 OPERATOR’S MANUAL

9.5.3 Disable Sound

To disable a sound, press the blue Switch button next to the event in the Sound Settings Screen followed by

the button.

9.6 Set Time

The User can set the time, date and time zone on the device according to the following conditions:

1. Admin, Lab, Production and Developer can set the time, date and time zone.

o Operators do not have authorisation

2. If the Set Time Automatically button is turned on by swiping right, the User can select the time zone by

pressing the bar labelled Timezone. Once pressed, the User can select the required time zone from the list.

Note: The device needs to be connected to the Internet. If the device is not connected to the Internet, Set

Time Automatically will retain the pre-set time settings which will appear in the display screen.

3. If the device is not connected to the Internet, the User can still change the Timezone by selecting Set Time

then Timezone and choosing an appropriate time zone. In this mode the displayed time will not automatically

adjust for daylight saving.

Figure 59: Date and Time