Operator's Manual

ETD-100 OPERATOR’S MANUAL
48
9.5 Sound Settings
To view and edit the device sound settings, navigate to the Sound
Settings Screen by pressing the Sound Settings button on the
Settings Screen.
On the Sound Settings Screen, the User can change the volume of
all sound effects and select sounds that will be played at different
events. The different events are described in Table 4. All sounds
will be played at the same volume which can be adjusted by the
User as illustrated below.
Event
Description
At startup
At startup when the GreyScan splash screen is displayed for the first time.
After initialization finished
At the end of initialization when the GreyScan ETD-10 is ready to run scans.
When PASS detected
At the end of a scan when the result is a PASS.
When threat detected
At the end of a scan when the result is a threat.
Table 4: Summary of available sound events
9.5.1 Change Volume
To change the volume of all sound effects, press the or buttons next to the volume display in the Sound
Settings Screen to decrease or increase the volume. Save the new volume setting by pressing the
button.
9.5.2 Enable Sound
To enable a sound on the Sound Settings Screen (52), press the
Switch button next to the event. To select a different sound
file, press the button right next to the Switch button and the Sound
Selection Screen will be displayed as illustrated in Figure 57.
Select a sound file by selecting the button next to the file. A
preview of every sound can be played by clicking on the
corresponding button. When the desired sound has been
selected, return to the Sound Settings Screen by pressing the
button. The new sound file is now associated with that
event. To save the new configuration, press the
button.
Figure 56: Sound Settings Screen
Figure 58: Sound Selection Screen
Figure 57: Sound Settings Screen with enabled sounds