Operator's Manual

ETD-100 OPERATOR’S MANUAL
46
9.4 Installing Remote Frontend
Install the Remote Frontend by extracting the GSN-1518-0113-33 zip file (provided by GreyScan) to a system or
PC folder where the User has write access. It is recommended to install the Remote Frontend on a short file path
to avoid file export issues. Installation and execution of this software must only be completed after the device has
been set up. The Remote Frontend can be connected to a device via Wi-Fi or Ethernet. A direct Ethernet
connection is recommended.
1. Create a shortcut on the User’s desktop to run the GreyScanFrontend.exe file.
2. Double click on the GreyScanFrontend.exe file to execute the Remote Frontend software installation.
Figure 51: Remote Frontend .exe file
3. For Wi-Fi connection, obtain the IP address of the device from Network Settings (once the device is
connected to Wi-Fi) and enter the IP address into the IP address field dialogue box (illustrated below):
Figure 52: Remote Frontend IP address field (Wi-Fi)
4. Press OK
5. Remote Frontend connection will establish and a login screen will appear on the PC’s desktop.
Figure 53: Remote Frontend login screen