Operator's Manual

ETD-100 OPERATOR’S MANUAL
45
To Add a Wi-Fi connection that is not seen on the Wi-Fi connection Screen list:
1. Ensure the User has both the SSID and password for
the desired Wi-Fi connection.
2. Scroll to the bottom of the available connection list on
the Wi-Fi Settings Screen using the blue arrow
buttons.
3. Once the User reaches the bottom of the list, press
the ADD button .
4. The Wi-Fi SSID and password fields can be entered
by pressing on each field. This will bring up the on-
screen keyboard for the User to enter the details.
5. Once SSID and password details have been entered press the save button.
This will return the User to the Wi-Fi Settings Screen.
6. If successful, a green tick marker indicates that the newly added Wi-Fi connection is active.
9.3.2 LAN Network Connections
LAN Network details will be displayed on the LAN Network Parameters Screen. To edit a LAN connection:
1. Navigate to the LAN Network Parameters Screen
from the Network Settings Screen.
2. Press the EDIT button next to the network
connection.
3. Once the EDIT button has been pressed, use the
touchscreen to modify LAN connection elements. The
blue arrow buttons can be used to scroll through the
list.
4. Press the SAVE button to save any
changes and return to the LAN Network Parameters Screen. If no changes have been made, press the Back
button to return to the LAN Network Parameters Screen.
Figure 49: Adding a New Wi-Fi Network
Figure 50: LAN Network Connection Edit