Operator's Manual

ETD-100 OPERATOR’S MANUAL

9.3.1.1 Editing a Saved Wi-Fi Connection

To edit a saved Wi-Fi connection:

1. Navigate to the Wi-Fi Settings Screen from the Network

Settings Screen.

2. Press the EDIT button next to the network

connection that requires editing.

3. Once the EDIT button has been pressed, use the

touchscreen to modify Wi-Fi elements. The blue arrow

buttons can be used to scroll through the list.

4. Press the SAVE button to save any changes

and return to the Wi-Fi Settings Screen. If no changes

have been made, press the Back button to return to the Wi-Fi Settings Screen.

9.3.1.2 Forgetting a Saved Wi-Fi Connection

To remove a saved Wi-Fi connection:

1. Navigate to the Wi-Fi Settings Screen from the Network Settings Screen.

2. Press the EDIT button next to the network connection that needs to be removed.

3. Once the EDIT button has been pressed the Wi-Fi connection parameters will be displayed.

Press the FORGET button to remove the Wi-Fi connection from the saved Wi-Fi connections.

4. Once the FORGET button is pressed, the User will return to the Wi-Fi Settings Screen.

9.3.1.3 Connecting to a new Wi-Fi Network

To connect to a Wi-Fi network seen on the Wi-Fi connection

Screen for the first time:

1. Press the EDIT button next to the desired

network connection.

2. Using the touchscreen press the password field and

enter the password associated with the Wi-Fi

connection using the on-screen keyboard.

9.3.1.4 Adding a New Wi-Fi Connection

NOTE: ONLY WPA (AES) WI-FI NETWORKS ARE SUPPORTED.

Figure 47: Wi-Fi Connection Edit

Figure 48: Connecting to a New Wi-Fi Network