Operator's Manual

ETD-100 OPERATOR’S MANUAL
43
Figure 44: Delete Scan Progress Bar
9.3 Network Settings
The device can be connected to the Internet via either a
LAN or wireless network. To view and edit device network
settings, navigate to the Network Settings Screen by
pressing the Network Settings button on the Settings
Screen.
On the Network Settings Screen, the User will be displayed
the type, status and IP address of different network
connections.
The status column will indicate which, if any, network
connections are active. A green tick indicates the network connection is active, and a red cross indicates the
network connection is inactive.
Pressing the blue switch button will turn the associated network connection on and off. To see details of each
network connection, press the desired connection on the touchscreen. The network connection details will be
displayed as illustrated in Figure 46. The Wi-Fi Settings Screen will show available Wi-Fi networks.
9.3.1 Wi-Fi Network Connections
Available and saved Wi-Fi connections will be displayed in the Wi-Fi Settings Screen. Users will be able to remove,
edit, and add new Wi-Fi connections to the device.
Figure 45: Network Settings Screen
Figure 46: LAN Network Parameters and Wi-Fi Settings Screens