Operator's Manual

ETD-100 OPERATOR’S MANUAL
40
9 Advanced Features - Supervisor
Supervisors with increased permissions to device configuration will have access functions not available to Operators
with basic User permissions. Such Operators with will not have access to the below advanced software features.
9.1 Software Upgrades
Device software upgrade requires a single USB key to update the operating system, controller bootloader, controller
firmware application, backend and local frontend. Software upgrades can also be deployed remotely provided the
device is connected to a network that the User permits GreyScan to have access to.
To upgrade the device’s software using a USB key:
1. Upgrade the operating system first by copying the operating system update onto the USB key (The USB must
not have any other files).
2. POWER down the device if it is powered ON and insert the USB containing the software upgrade package.
3. POWER ON the device by pressing the Power button.
4. The device may restart during this process. Follow the prompts on the following screens.
5. POWER OFF the device and POWER ON again.
To upgrade the software remotely the User needs to contact a GreyScan service team and enable the network
connectivity (refer to Section 9.3.2)
9.2 File Management
9.2.1 Sample Management Screen
To view, save and delete specific can files, press the button on the Settings Screen. This will take
the User to the sample management screen.