Manualshelf

Operator's Manual

ManualsBrandsGREYSCAN ManualsElectronicsGreyScan ETD-100
31323334353637383940
ETD-100 OPERATOR’S MANUAL
39
4. Take the new Sample Trap Holder and insert into the Swab Slot with the large circle facing towards the
Sample Filter.
5. Following the installation of a new Sample Trap Holder, press the Done button on the maintenance pop up to
return to the Maintenance screen.
6. On the Maintenance screen, press the Back and Calibrate button to begin a device flush to prepare for
testing. (the message the User will observe on the screen is CALIBRATING)