Operator's Manual

ETD-100 OPERATOR’S MANUAL
31
6.11 Taking a Sample with a Sampling Wand
A sampling wand can be used to collect a sample. The overview of the sampling wand can be seen in Figure 31.
Figure 31: Sampling Wand Overview
To use a Sampling Wand:
1. Unlock the snap fit locking device and open the sampling wand lever.
2. Insert a blank sample Swab into the sampling wand following the orientation illustrated on the sampling wand
illustrated in Figure 32: Correct Swab Orientation (Sampling Wand).
3. Snap the locking device closed.
Figure 32: Correct Swab Orientation (Sampling Wand)
4. The Sampling Wand is now ready to collect a sample. For more information on testing a sample see refer to
Section 6.3.1.