Operator's Manual

ETD-100 OPERATOR’S MANUAL
20
The bottom section of the INSERT SWAB Screen has a button. Once a Swab has been inserted, pressing the
PROCEED button will begin the device test
sequence. See Section 6.3 Collecting and Testing a Sample on
how to process a test sample.
If required, a Sample ID can be entered BEFORE a sample is
analysed by pressing on the Sample ID field and entering a Sample
ID name using the on-screen keyboard. Note: Invalid characters
are replaced with ‘_’ to allow data to be recorded to files. Tagging
scans with a Sample ID can be helpful as the label can be
searched for. See 9.2.1: Sample Management Screen
.
6.2.2 The Settings Screen
The Settings Screen gives the user access to different options
including exporting data, device maintenance and Network Settings.
Each button is described in Table 1 below.
The Settings Screen is not the same for all users. Supervisors and
users with more permissions have access to a wider range of
functions.
Button
Description
Home button. Takes the user back to the INSERT SWAB Screen.
Save PDF button. Saves a PDF and CSV file of the previous test scan to file via USB (refer to Section
6.5). Note: Save PDF doesn’t appear until after the first scan of the session.
Logout button. Logs the current user out of the device and reverts to the login Screen (refer to Section
6.10).
Lab UI button. Opens the Lab User Interface.
Sound settings button.
Allows the User to edit sound settings. (refer to Section 9.5 Sound
Settings).
Network settings button.
Allows the User to view and edit network settings. (refer to Section 9.3 Network
Settings)
Diagnostics button.
Flush button. Begins a system flush. Users will see the Flush in Progress Screen (See Section 6.3.4
FLUSH IN PROGRESS Screen).
Set time button. Opens the Set Time Screen for users to change the system date and time.
Scans button. Opens the Scans Menu.
Figure 13: Enter New Sample ID
Figure 14: Settings Screen