Manualshelf

Operator's Manual

ManualsBrandsGREYSCAN ManualsElectronicsGreyScan ETD-100
11121314151617181920
ETD-100 OPERATOR’S MANUAL
14
5.3 Installation of the Sample Trap Holder
Sample Trap Holder Installation Method
1. Remove the Sample Trap Holder from the plastic packaging and insert into the Sample Trap Holder slot.
Lower until the top lip is in contact with the device’s front cover plate.
2. Insert the Sample Trap Holder as illustrated into the swab slot with the large open circle facing forward.
Refer to Figure 6: Swab and Filter Correct Installation (Top View).
Figure 4: Sample Trap Holder Orientation