Operator's Manual

ETD-100 OPERATOR’S MANUAL
13
5.2 Installation of the Reagent Cartridge
Reagent Cartridge Installation Method
1. Remove the Reagent Cartridge from the packaging and open the device lid.
2. Check the Reagent Cartridge has not expired (Expiry Date is printed on the side of the Reagent Cartridge).
3. Remove the reagent transport protection caps on each fluidic port (if fitted) and return the caps in the sealed
bag provided for future storage or transport (Refer to Section 7.2).
Figure 2: Reagent Transport Protection Caps
4. Position the Reagent Cartridge as illustrated.
5. Lower the Reagent Cartridge into the device and push down firmly until the Reagent Cartridge is seated.
Figure 3: Reagent Cartridge Orientation
6. Push down on the two blue handles on either side of the Reagent Cartridge until they click into place.