Operator's Manual

ETD-100 OPERATOR’S MANUAL
11
4 Technical Specifications
4.1 System Specification
Connectivity
Ethernet, Wi-Fi, USB2.0
Weight
17.1 kg (37.7 lb). with Reagent Cartridge fitted
14.5 kg (32.0 lb). Reagent Cartridge not installed.
2.6 kg (5.7 lb). Reagent Cartridge
Analysis Time
Less than 1 Minute
Start-up Time
10 - 15 Minutes
Dimensions
(W x D x H) 48.8 cm x 38.6 cm x 22.9 cm (19.20” x 15.20” x 9.00”)
Operating Temperature
5°C to 40°C (40°F to 104°F)
IP Rating
IP63. Pelican case closed.
IP2X. Pelican case open, Reagent Cartridge installed.
Explosives Detection
Nitrates (NO3), Chlorates (ClO3), Perchlorates (ClO4)
Limit of Detection
20-60 ng range (depending on the specific ion)
Calibration Type
Automatic Self-Calibration
Operating Voltage
DC: 24VDC, 3.75A MAX
AC: 100-240 VAC, 50-60 Hz
Maximum Rated Power
90W
Detection Alarm
Audible/Visual (Configurable)
Reagent Cartridge Capacity
Approximately 1500 scans. Actual capacity is dependent on usage cases
Sample Filter Life
500 scans. Actual filter life is dependent on swabbed material.
NFC/RFID
13.56MHz