TWIN BUNKBED Color: Mocha ATTENTION USE THIS MANUAL TO ASSEMBLE THE TWIN BUNK BED Date of Purchase: _____ / _____ / _____ Lot Number: (taken from carton) DO NOT RETURN PRODUCT TO THE STORE. If a part is missing or damaged, contact our customer service department. We will replace the part FREE of charge. NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
CUSTOMER SERVICE If you are missing parts or have any questions about this product, contact our customer service representative first! WARNING * STRANGULATION HAZARD - NEVER ATTACH OR HANG ITEMS TO ANY PART BUNK BED THAT ARE NOT DESIGNED FOR USE WITH THE BED; FOR EXAMPLE, BUT NOT LIMITED TO HOOKS, BELTS AND JUMP ROPES. * FOLLOW THE INFORMATION ON THE WARNINGS APPEARING ON THE UPPER BUNK END STRUCTURE AND ON THE CARTON. DO NOT REMOVE WARNING LABEL FROM BED.
NOTES * READ EACH STEP CAREFULLY BEFORE STARTING. IT IS VERY IMPORTANT THAT EACH STEP OF INSTRUCTION IS PERFORMED IN THE CORRECT ORDER. IF THESE STEPS ARE NOT FOLLOWED IN SEQUENCE, ASSEMBLY DIFFICULTIES WILL OCCUR AND CAN RESULT IN INJURY. * CAUTION: ADULT ASSEMBLY REQUIRED * MAKE SURE ALL PARTS ARE INCLUDED. WORK IN SPACIOUS AREA, PREFERABLY ON A SMOOTH SOFT SURFACE. * ASSEMBLY WILL REQUIRE TWO PEOPLE. * MOST BOARD PARTS ARE LABELED OR STAMPED ON THE RAW EDGE.
TWIN BUNK BED HARDWARE LIST 1 2 Φ 1/4" x 100mm Φ 6.5mm x 48mm JOINT CONNECTOR (4mm HEX HEAD) 16 PCS WOOD JOINT CONNECTOR (4mm HEX HEAD) 10 PCS 3 4 Φ 6.5mm x 100mm Φ 4mm x 35mm WOOD JOINT CONNECTOR (4mm HEX HEAD) 24 PCS FLAT HEAD SCREW 24 PCS 5 6 Φ 10mm x 100mm Φ 4mm x 30mm METAL DOWEL 4 PCS FLAT HEAD SCREW 6 PCS 7 8 Φ 10mm x 50mm WOOD DOWEL 62 PCS 9 ALLEN KEY 1 PC 10 11 Φ 11.
TWIN BUNK BED PARTS LIST A B C TOP POST 1 PC TOP POST 2 PCS D TOP POST 1 PC E F BOTTOM POST 2 PCS BOTTOM POST 2 PCS HEADBOARD TOP CROSS 4 PCS G F L L B A L U F J E Q L N Q H S L D Q S F N G L G C L O K T P B T I S F L L G E D
TWIN BUNK BED PARTS LIST G H HEADBOARD BOTTOM CROSS 4 PCS J I TOP FRONT SIDE RAIL 1 PC K BACK SIDE RAIL 1 PC M L BOTTOM BACK SIDE RAIL 1 PC N LONG GUARDRAIL 2 PCS P SHORT GUARDRAIL 2 PCS RIGHT LADDER END 1 PC HEADBOARD CENTER CROSS 4 PCS SLAT WITHOUT WOOD DOWEL 12 PCS O Q S BOTTOM FRONT SIDE RAIL 1 PC LEFT LADDER END 1 PC R LADDER STEP 3 PCS T GUARDRAIL LEG 2 PCS U SLAT WITH WOOD DOWEL 4 PCS GUARDRAIL POST 1 PC
TWIN BUNK BED 7 7 7 7 7 7 7 7 7 7 7 7 7 7 A 7 7 C 3 STEP 1 Insert wood dowels (7) into the ends of headboard top cross (F), headboard bottom cross (G) and headboard center cross (S). Attach them to top posts (A & B) using wood joint connectors (3) as shown. Tighten the wood joint connectors (3) with the Allen key (8). NOTES: Headboard top crosses (F, G& S) may require that they be pulled closer together or further apart in order to allow wood dowels (7) to align with holes in top posts (A & B).
TWIN BUNK BED 7 E 7 7 7 7 E 7 7 7 D 7 7 7 7 7 7 D 7 7 STEP 2 3 Insert wood dowels (7) into the ends of headboard top cross (F), headboard bottom cross (G) and headboard center cross (S) and attach them to bottom posts (D) & (E) using wood joint connectors (3) as shown. Tighten the wood joint connectors (3) with the Allen key (8).
TWIN BUNK BED K I STEP 3 Attach the two headboards with bottom posts (D & E) to bottom front side rail (I) and bottom back side rail (K) using joint connectors (1) and barrel nuts (9) as shown. Tighten the joint connectors (1) with the Allen key (8). Note: This is the lower bunk.
TWIN BUNK BED J H STEP 4 Insert wood dowels (7) into each end of the long guardrails (M). Attach two long guardrails (M) and two top side rails (H & J) to top posts (A & B) and (C & B) as shown. Fasten top side rails (H & J) with joint connectors (1) and barrel nuts (9). Fasten long guardrails (M) with wood joint connectors (3). Tighten the joint connectors (1) and wood joint connectors (3) with the Allen key (8).
TWIN BUNK BED U 8 3 U 7 7 11 10 A N H B 10 STEP 5 Insert wood dowels (7) into short guardrails (N). Attach short guardrails (N) to guardrail post (U) with wood joint connectors (3) as shown. Fasten the short guardrails (N) to top post (B) with wood joint connectors (3). Fasten the guardrail post (U) to top front side rail (H) with joint connectors (10) and hex cap (11) as shown.
TWIN BUNK BED M 6 N 6 6 H 6 STEP 6 Attach the guardrail leg (R) to the short guardrails (N) and top front side rail (H) with flat head screws (6). Attach the other guardrail leg (R) (on the other side of the bed) to long guardrails (M) and top back side rail (J) with flat head screws (6) as shown. Use a Phillips head screwdriver (not included) to tighten the flat head screws.
TWIN BUNK BED O P STEP 7 Insert wood dowels (7) into the end of the ladder steps (Q). Attach left ladder end (O) and right ladder end (P) to ladder steps (Q) with wood joint connectors (2). Tighten the wood joint connectors (2) with the Allen key (8).
TWIN BUNK BED B 5 A H 5 C D 5 B I D 5 E STEP 8 insert the metal dowels (5) into the holes in the bottom posts (D and E). Stack the top bunk onto the bottom bunk with the help of another person.
TWIN BUNK BED A U 2 N H D 2 O P I A N U 2 H 2 D O P I 2 2 8 back view STEP 9 Attach the ladder to the top front side rail (H) and bottom front side rail (I) with wood joint connectors (2) as shown. Use Allen key (8) to tighten the joint connectors.
TWIN BUNK BED J 4 H L K I 4 STEP 10 Insert two slats with wood dowel (T) into the center slots of the top side rails (H &J) of the upper bunk as shown. Attach slats without wood dowel (L) onto top side rails (H &J) of the upper bunk with flat head screws (4) as shown. Use Phillips screwdriver (not included) to tighten flat head screws (4). Repeat this process for the bottom bunk.
TWIN BUNK BED To convert your bunk bed into two separate beds, remove the ladder and all the guardrails. With the help of another person, unstack the top bunk from the lower bunk.
TWIN BUNK BED CAUTION: This unit is intended for use only with the products and/or maximum weights indicated. Use with other products and/or products heavier than the maximum weights indicated may result in instability or cause possible injury. DO NOT ALLOW HORSEPLAY ON OR UNDER THE BED AND PROHIBIT JUMPING ON THE BED. DO NOT ALLOW CHILDREN UNDER 6 YEARS OF AGE TO USE THE UPPER BUNK. BED IS DESIGNED FOR CHILDREN RANGING FROM 6 YEARS OF AGE TO YOUNG TEENAGERS.
Customer Service PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE PLEASE CONTACT CUSTOMER SERVICE REPRESENTATIVES AT THE FOLLOWING NUMBERS SHOULD THERE BE ANY MISSING OR DEFECTIVE PART(S).
