Assembly Instructions

ASSEMBLY INSTRUCTIONS
1. Carefully unpack and lay out the parts as
shown in illustration.
2.
Screw lamp body (B) onto base (A).
3.
Loosen Knob (C), insert shade part (D) through
the hole at the back of (C).
4.Screw part (D) into (B).
5. Adjust the lamp to a desired height,
then tighten screw (C).
IMPORTANT SAFETY INSTRUCTIONS:
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
THIS PORTABLE LAMP HAS A POLARIZED PLUG (ONE BLADE IS WIDER THAN THE OTHER) AS A
FEATURE TO REDUCE THE RISK OF ELECTRIC SHOCK. THIS PLUG WILL FIT IN A POLARIZED
OUTLET ONLY ONE WAY. IF IT DOES NOT FIT FULLY IN THE OUTLET, REVERSE THE PLUG. IF IT
STILL DOES NOT FIT, CONTACTA QUALIFIED ELECTRICIAN. NEVER USE WITH AN EXTENSION
CORD UNLESS THE PLUG CAN BE FULLY INSERTED. DO NOT ALTER THE PLUG.
USE 60 WATTAGE (MAXIMUM) TYPE
A BULB (BULB NOT INCLUDED)