Quick Guide

3
/
8
To manually pair your earphone with your mobile phone, please follow steps as below:
1) Please delete (or ignore) your earphone from Bluetooth Settings \ Bluetooth \ Paired device
list in phone system settings.
2) Wearing the earbuds, tap and hold both surfaces for 3 seconds. You will hear “paring” sound
to indicate the status.
3) Enable Bluetooth on your smart phone and scan for available devices, select “STX01-EVT”
from the scan list and tap to pair.
4) Once paired, your earphone will be added to the paired device list and be connected.
5) Later, every time your earphone powers up, it will connect the last paired system
automatically.
6) If you fail, please repeat step 1-4.
If connection fails, you can restore your earphone to factory settings and connect again. To do
this, please follow the steps as below:
1) Delete (or ignore) your device from Bluetooth Settings \ Bluetooth \ Paired device list in
your mobile phone system.
2) Tap and hold both surfaces for more than 10 seconds to reset the paring information.
Manual Pairing
Reset