User's Manual

1. Check your email account, and open the “Invitation to use everbeat” email

2. Touch on the first “here” to set up your password

3. Type in your password identically twice.

Figure 5 Registration email from everbeat system

Your account is now ready to use!

If you forget your password later on, you can touch on the “forgot password” link and you will receive an

email to reset your password. Now return to your everbeat App and login using your email and password

that you set.

You are now using the everbeat App!

Step 2. Charging the everbeat watch

Note: Click on this LINK to watch a video showing how to charge the everbeat watch

1. Plug in your everbeat charging stand by inserting into any USB charging slot.

2. Place the everbeat watch onto the charging stand with the silver electrode on the right side of

the charger. The watch will magnetically secure to the charger and start charging.

Your everbeat will take about an hour to fully charge and will last approximately seven days. When the

everbeat watch battery falls below 10%, it will vibrate, and display “Charge me”. This vibration reminder

will only happen three times during the day to avoid disrupting your sleep. Your everbeat watch may still

operate for up to 8 hours after this message first occurs, but you should charge it soon to preserve its full

functionality. The battery charge indicator is on the left side of the display:

Figure 6: Battery indicator on the everbeat watch

Caution: The everbeat watch and charging stand are designed for use only with UL listed chargers with 5

volts DC, and between 1.0 and 2.4 amps output through a standard USB connection.

Touch here to

set password

Battery Level

Indicator