User manual

H60.0.12.6C-13 Operating Manual GMH 3851 Page 9 of 22
_____________________________________________________ _____________________________________________________________________________
5.6.3 Measuring
Split the log:
Use an suitable axe for splitting. Fast working splitting machines can produce heat which may falsify the
measuring.
Preparation of core temperature measuring of log:
Drive in the impact electrode, put temperature probe into the generated hole.
Three measuring values have to be taken at the freshly split surface,
2 measuring spots should have 5 cm distance
from cut side, the third should be placed in the
center.
Drive in the needles sufficiently deep( > 5mm) and
across the fibre direction
.
Measuring procedure:
Step
Action
Description
Display
Measuring 1
Drive in needles
Start measuring
press
Measuring value 1 will be
automatically taken
Measuring stable:
Instrument is ready for
next step
Measuring 2
Drive in needles
Start measuring
press
Measuring value 2 will be
automatically taken
Measuring stable:
Instrument is ready for
next step
Measuring 3
Drive in needles
Start measuring
press
Measuring value 3 will be
automatically taken
Measuring stable:
Average out of the 3 will
be displayed
e.g.
Return to continous
measuring display
press