Instructions
H82.0.03.6C-08 Operating Manual GMH 5155 page 8 of 22
_____________________________________________________ _____________________________________________________________________________
Menu
Parameter
Value
Description
or
Rate: Measuring rate
*
Slo
Slow measuring rate (4 Hz filtered, low power consumption)
FASt
Fast measuring rate, filtered (1000 Hz)
P.dEt
Peak detection: fast measuring rate, unfiltered (1000 Hz)
Averaging Filter
*
1 … 120
Averaging period in seconds
oFF
Averaging function is deactivated
Auto Power-Off: Select power-off delay
1 ... 120
Power-off delay in minutes.
Device will be automatically switched off as soon as this time has
elapsed if no key is pressed/no interface communication takes place
oFF
Automatic power-off function deactivated (continuous operation)
Background illumination
oFF
Illumination deactivated
5 … 120
on
Illumination always on
Set Calculation: Calculated display values (based on Sensor 1)
*
Choice of function
oFF
No calculated display
dP:dt
Pressure change per time (leak rate measurements, ...)
SPEd
Flow speed measurement with pitot tube etc.
FLo
Volumetric flow rate measurement with pitot tube etc.
“dP:dt”: Settings
Time unit of pressure change rate
Per.S
Pressure change rate unit per second, e.g. mbar/s
Per.n
Pressure change rate unit per minute, e.g. mbar/min
Per.h
Pressure change rate unit per hour, e.g. mbar/h
Test period, for which the pressure change rate is calculated
0:01... 1:00
Period in [minutes:seconds], ex works: 1s
SPEd” or “Flo”: Settings
SPEd: speed unit
n:S
meter per second, m/s
kn:h
kilometer per hour, km/h
nPh
miles per hour, mph
knot
knots
FLo: Volumetric flow unit
n3:s
cubic meter per second, m
3
/s
n3:n
cubic meter per minute, m
3
/min
n3:h
cubic meter per hour, m
3
/h
L:S
liter per second, l/s
L:n
liter per minute, l/min
FLo: Volumetric flow - cross section
10.0 … 1999.9,
2000 … 14000
cross section in cm
2
0.1000 ...
1.9999
coefficient,(Prandtl pitot tube = 1.0000 please refer to chapter
7.7)
-100.0 ...
1000.0 °C
air flow temperature
100.0 ...
1999.9 mbar
ambient pressure
0000, 000.0 …
00.00
decimal point setting
oFF, 1 … 1000
minimum display, below always display 0