Instructions
H82.0.03.6C-08 Operating Manual GMH 5155 page 5 of 22
_____________________________________________________ _____________________________________________________________________________
4 Handling
4.1 Display elements
1
Main display: measuring value sensor 1
2
Secondary display: measuring value sensor 2 or
difference sensor 1 sensor 2
3
Arrows for selected measuring unit
4
Rating of battery status
5
Display elements to show minimum / maximum / memorized
measuring value as well as tare-function and sea-level-
correction
6
user arrow: measuring value is shown in freely adjustable
user-unit (please refer to chapter 7.1)
7
corr arrow: zero-point or slope correction is active
8
logg arrow: logger is ready
arrow flashing: automatic recording (Logg CYCL) is active
4.2 Pushbuttons
On / off key, backlight
press shortly: activate backlight or switch on instrument
press longer: switch off instrument
set / menu:
press shortly: display change:
- measuring value sensor 2
- difference sensor 1 sensor 2
-
to chapter 7.6 and 0
press for 2 sec. (menu): invoke configuration menu
min / max:
press shortly: min. or max. value is displayed
press for 2 sec: the corresponding value is deleted
press shortly: tare-function: display is set to 0. All measuring
values are displayed relatively to this set tare-
value from now on.
press for 2 sec: deactivate tare-function
store / enter:
Logger off:
displayed)
(Logger on: Operation of data logger - chapter 8)
(Set/Menu: confirm settings, return to measuring)