User manual

H57.0.0X.6C-01 Operating Manual MSD … page 4 of 4
6 Specification
6.1 Specification (MSD … BAE):
MSD 1 BAE
MSD 2.5 BAE
MSD 4 BAE
MSD 6 BAE
MSD … BAE
(special range)
Measuring range:
0 … 1000 mbar abs.
0 … 2500 mbar abs.
0 … 4000 mbar abs.
0 … 6000 mbar abs.
refer to type plate
Overload: (max.)
5 bar abs.
10 bar abs.
17 bar abs.
35 bar abs.
refer to type plate
Resolution:
1 mbar
1 mbar
1 mbar
1 mbar
refer to type plate
Sensortyp: stainless steel absolute pressure sensor.
Suitable for aggressive media, water, etc.
6.2 Specification (MSD … ..RE):
MSD 400 MRE
MSD 1 BRE
MSD 2.5 BRE
MSD 4 BRE
MSD 6 BRE
MSD 10 BRE
MSD 25 BRE
MSD 40 BRE
Measuring range:
0,0 … 400,0
mbar rel.
0 … 1000
mbar rel.
0 … 2500
mbar rel.
0 … 4000
mbar rel.
0 … 6000
mbar rel.
0,00 … 10,00
bar rel.
0,00 … 25,00
bar rel.
0,00 … 40,00
bar rel.
Overload: (max.)
2 bar
5 bar
10 bar
17 bar
35 bar
35 bar
50 bar
80 bar
Resolution:
0,1 mbar
1 mbar
1 mbar
1 mbar
1 mbar
0,01 bar
0,01 bar
0,01 bar
MSD 60 BRE
MSD 100 BRE
MSD 160 BRE
MSD 250 BRE
MSD 400 BRE
MSD 600 BRE
MSD 1000 BRE
MSD … ..RE
(Sonderbereich)
Measuring range:
0,00 … 60,00
bar rel.
0,0 … 100,0
bar rel.
0,0 … 160,0
bar rel.
0,0 … 250,0
bar rel.
0,0 … 400,0
bar rel.
0, 0 … 600,0
bar rel.
0 … 1000
bar rel.
refer to type plate
Overload: (max.)
120 bar
200 bar
320 bar
500 bar
800 bar
1200 bar
1500 bar
refer to type plate
Resolution:
0,01 bar
0,1 bar
0,1 bar
0,1 bar
0,1 bar
0,1 bar
1 bar
refer to type plate
Sensortyp: stainless steel relative pressure sensor for overpressure measuring.
Suitable for aggressive media, water, etc.
Caution: The pressure compensation hole at the back part of the housing has to be kept clean!
6.3 Common specifications (MSD … BAE, MSD … ..RE):
Accuracy: (typ. values) ±0,2%FS (hysteresis and linearity)
±0,4%FS (temperature influence from 0-50°C)
Pressure connection: connections thread G1/4. Key width: 27 mm
Device Connection: M12-plug, for connection cable MSD-K31
Electronics: PC-board with amplifier and data memory for sensor data
( measuring data, calibration etc. ) integrated in sensor housing.
Nominal temperature: 25 °C
Operating conditions: -20 to +70 °C (compensated range: 0 to 70 °C)
Storage temperature: -40 to +80 °C
Housing: made of stainless steel (CrNi steel or Elgiloy®)
Weight: 220 g
IP rating: IP 67 (sensor), IP 54 (plug)
EMC: The MSD ... corresponds to the essential protection ratings
established in the Regulations of the Council for the Approximation
of Legislation for the member countries regarding electromagnetic
compatibility (2004/108/EG). Additional fault: <1%