User manual

G14.0.11.6C-04 Operating Manual MINISOFT page 6
GREISINGER electronic GmbH Hans-Sachs-Straße 26 Fon: 0049 9402 / 9388-0
D-93128 Regenstauf Fax.: [phone] / 9383-33
6 Measuring Value Diagrams
The logger data and logger windows loaded can also be displayed as diagrams.
To do so select ‘Create New Diagram‘ from the ‘Diagram’ menue.
A selection of all possible graphs will be displayed. Select the graphs desired and acknowledge selection by pressing
‘Ok’. The diagram will be opened.
System limitations: - max. 2 different units (°C, %RH, etc.) per diagram
- max. 15 graphs per unit
Adding Data Labels
To add a comment to a specific measuring point select menue item “Diagram/Add Data Label” or click on the
corresponding symbol. By moving the mouse over the diagram the symbol will appear as mousepointer. A text
line that can be filled freely will be placed at the position desired by a mouseclick
Adding Series
To be able to display additional measuring series in a diagram, select the menue item “Diagram / Add Sereies” or click
on the corresponding symbol of the diagram window. The data source selection will appear again for you to select an
additional measuring series.
‚Zoom‘: Enlarge a Area of the Display
If 2 units are displayed : Use the and symbols to select the Y-axis desired.
Place mouse at the beginning of the area desired, keep left mouse key pressed, move mouse to the end of the area
desired, release mouse key: the part selected will be enlarged (zoomed). Use “Diagram – Zoom Back” to get back to
the original view. Use “Diagram – Zoom All” to get back to the entire diagram.
Use scrollbar to move the zoomed part to the left or right or upwards and downwards. To display exact parts of the
screen we recommend using the “Diagram – Settings”. This function can be used to enter the exact position (entering
of figures and time settings) of the segment to be displayed.
Copying Data To Clipboard
Diagrams can be copied to the clipboard, from where they can be inserted to other applications again.
Click on the desired diagram and press the key combination Strg and C -> The diagram will be copied to the clipboard
as a bitmap.
Legend: if activated a
short description of the
graph will be displayed.
Add/Delete Series:
the number of graphs
displayed can be
changed (see
below)
Settings:
manual zoom,
grid and color
settings
Zoom Back:
cancel last zoom action
Zoom all:
Show max.
diagram area
Display Points:
Display (marking) of
measuring points
Change Name:
The name of the diagram (here:
‚
Dia
g
ramm 1‘
)
can be chan
g
ed
Cursor: if activated a crosshair cursor will be displayed to
show the individual measuring points. The measuring point
data will be displayed in the statusbar.
Scrollbar: if a
zooming action
has been carried
out the scrollbar
can be used to
‚go through‘ the
diagram.
Zoom Left/Right Y-Axis:
chose here if the mouse zoom
function is to be applied to the
left or right Y-axis.
Add/Delete Labels: to describe
measuring points (see below)
Y
-Axes: if you select graphs with different units, two Y-axes will be displayed.