User manual

S58.0.01.6C-01 Page 4 of 6
5. Installation
5.1 Windows Vista™, Windows XP and Windows 2000
For installation of the device drivers a user account with an administrator-authorisation is required.
If you haven’t an appropriate authorisation please consult your system administrator.
• Insert driver cd into the drive of your PC.
• Start the installation of the driver.
Path-example: E:\Treiber USB100\CDM 2.02.04.exe
E: means the letter of your drive.
• Follow the instructions of installation.
• Plug in the USB 100 into the USB-connection.
• Now the installation will be finished.
Now the USB 100 is installed on your system and available for all users.
For application with our software a new additional COM-Port is available (quod vide chapter 7).
6. Specification
Connection:
PC: Standard USB-plug connector (type A)
EASYBus: connection jack M8 (3-pin) for direct connection of a T-Logg
Power Supply: via USB-interface
Operating temperature: 0 ... +50 °C
Storage temperature: -25 ... +70 °C
Cable length: 1 m
Weight: 40 g
EMV:
The device corresponds to the essential protection ratings established in the Regulations of the
Council for the Approximation of Legislation for the member countries regarding electromagnetic
compatibility (2004/108/EG). In accordance with EN 55022 class A, EN 55024.
System requirements:
Intel Pentium III Processor or higher
Operating system: Windows 2000 / Windows XP / Windows Vista.
Free USB Port.