User Manual

13
OPERATING INSTRUCTIONS
ON/Off SWITCHES
The hedge trimmer has an electronic control panel with on/off button and an anti-jam function. It
1. Push the power button (I/O) to turn the unit on.
2. Slide the lock-out button (2) into the handle and hold.
3. Squeeze the trigger switch (3). The hedge trimmer will turn ON.
4. Release the lock-out button. The hedge trimmer will stay on as long as the trigger switch
5. The hedge trimmer will stop if you release the trigger handle.
IMPORTANT: If the hedge trimmer is accidentally dropped, the hedge trimmer will turn OFF
and the blade will coast to a stop after several seconds. The hedge trimmer will then be locked
OFF again.
(See Figure 3.)
Fig. 3
also has a lock-out button and switch trigger.
is engaged.
1
2
3
On/off power button