Operating Guide

OPERATING YOUR REEL MOWER
16
CHECKING THE ADJUSTMENT
1. Turn mower upside down.
2. Insert a piece of paper between cutter bar and reel blades, and slowly turn wheel by hand.
3. All blades should slice the paper evenly, along the entire length of the cutter bar while the reel
turns smoothly.
4. If mower has an intermittent cut, adjustment should be made to the appropriate side of blades
to attain proper cutting action.
W A R N I N G
Do not overtighten adjustment screws, as this could damage cutter bar. Both screws must be
tight on nal adjustment.