Operating Guide
10
W A R N I N G
Do not allow familiarity with this product to make you careless. Remember that a careless
fraction of a second is sufcient to inict serious injury.
W A R N I N G
Do not use any attachments or accessories not recommended by the manufacturer of this product.
The use of attachments or accessories not recommended can result in serious personal injury.
ASSEMBLING THE HANDLE (See Figure 3-5)
NOTE: Do not completely tighten bolts until assembly is complete.
• Insert the two center handle pieces (2) into the left and right side of the top handle (1) and
secure with two carriage bolts (6), at washers (7) and lock nuts (8) provided. (Fig. 3)
• Connect the right lower handle (4) with the left lower handle(3) and secure with two carriage
bolts (6), at washers (7) and lock nuts (8) provided. (Fig. 4)
• Attach the top handle subassembly previously assembled, to the lower handle subassembly
using four carriage bolts (6), at washers (7) and lock nuts (8) provided. (Fig. 5)
• Tighten all the lock nuts on the joints of the handle assembly.
ASSEMBLY INSTRUCTIONS
Fig. 5
Fig. 3
Fig. 4