User's Manual

Introduction
The GreenWave Reality Smart Home Platform helps create a smart, energy-efficient home by monitoring
and controlling your appliances, electronics, and lighting. You can conserve energy with minimal impact to
your lifestyle by using our products to easily manage your devices.
Simply connect the Gateway or Lighting Gateway to your home
network, plug your devices into our PowerNodes, connect your
network light bulbs, and then monitor and control the your
power usage through a smart device application.
Connected Lighting Overview
The Connected Lighting kit includes a wireless smart lighting system that helps make the lighting in your
home more energy efficient and easier to manage wirelessly. The lighting solution consists of high-
quality, connected LED bulbs from our partners, a hand-held remote controller, and an optional Lighting
Gateway that allows for complete remote lighting control.
•
The Energy Star connected LED or CFL light bulbs typically consume about 80% less energy
than an equivalent incandescent or halogen bulbs.
•
The Lighting Remote can control four groups of bulbs and can turn lights on and off
or dim them with the touch of a finger. The remote can be used with or without the
Lighting Gateway.
•
The Lighting Gateway is the hub that connects the smart bulbs to your
home network and manages powerful Smart Controls and remote
access to ensure your scheduled events get activated reliably.
•
For added convenience and safety, the solution is light switch friendly,
meaning that existing wall switches will still turn the light on or off in all
circumstances.
Smart Device Requirements
To use a smart device, smart phone, tablet or tv to manage your Connected Lighting, your smart device
must meet the following minimum requirements. If not, you can still use your lighting kit with the remote
control.
•
For Android devices:
o
Android operating system 2.2 and above
Introduction
Connected Lighting User Guide | 1